• Pin – Stainless Steel
• Base – Aluminum (5000 Series)

CAP:

The cap for use with this stud is the WCN AR CAP annular ring cap.

The post Bi-Metallic CD Annular Ring appeared first on Davis Stud Welding.

]]> https://davisstudwelding.com/product/bi-metallic-cd-annular-ring/feed/ 0 3378 https://davisstudwelding.com/product/bi-metallic-cd-notched-end-weld-stud/ https://davisstudwelding.com/product/bi-metallic-cd-notched-end-weld-stud/#respond Fri, 01 Nov 2019 02:16:21 +0000 http://35.203.42.123/?product=bi-metallic-cd-notched-end-weld-stud

The post Bi-Metallic CD Notched End Weld Stud appeared first on Davis Stud Welding.

]]> MATERIAL:

• Pin – Stainless Steel
• Base – Aluminum (5000 Series)

WASHER:

The washer for use with this stud is the WAK notched end key hole slotted washer.

The post Bi-Metallic CD Notched End Weld Stud appeared first on Davis Stud Welding.

]]> https://davisstudwelding.com/product/bi-metallic-cd-notched-end-weld-stud/feed/ 0 3379 https://davisstudwelding.com/product/mushroom-navy-cap-2/ Fri, 01 Nov 2019 02:16:20 +0000 http://35.203.42.123/?product=mushroom-navy-cap-2

The post Mushroom Navy Cap appeared first on Davis Stud Welding.

]]> NOTE:

AR CAP is sold separately. Not a component part of stud.

The post Mushroom Navy Cap appeared first on Davis Stud Welding.

]]> 3376 https://davisstudwelding.com/product/bi-metallic-cd-weld-stud/ https://davisstudwelding.com/product/bi-metallic-cd-weld-stud/#respond Fri, 01 Nov 2019 02:16:20 +0000 http://35.203.42.123/?product=bi-metallic-cd-weld-stud MATERIAL:

• Pin - 10 GA (.135 Dia.) Stainless Steel
• Pin - 12 GA (.105 Dia.) Stainless Steel
• Base - Aluminum (5000 Series)

WASHER:

Self-locking washers are available in a variety of sizes, shapes and materials.

The post Bi-Metallic CD Weld Stud appeared first on Davis Stud Welding.

]]> The post Bi-Metallic CD Weld Stud appeared first on Davis Stud Welding.

]]> https://davisstudwelding.com/product/bi-metallic-cd-weld-stud/feed/ 0 3377 https://davisstudwelding.com/product/annular-groove-cap/ https://davisstudwelding.com/product/annular-groove-cap/#respond Fri, 01 Nov 2019 02:16:18 +0000 http://35.203.42.123/?product=annular-groove-cap

The post Annular Groove Cap appeared first on Davis Stud Welding.

]]> ANNULAR GROOVE CAP

(For annular groove shoulder studs)

APPLICATION:

Designed to permanently lock on to groove shoulder studs to hold panel in place against stud shoulder.

MATERIAL:

Aluminum

 

SIZE:

For or 3/16″ diameter annular groove.

The post Annular Groove Cap appeared first on Davis Stud Welding.

PINS 

SIZE

D

L

FD

12GA

.105

AS REQUIRED

.220

10GA

.135

AS REQUIRED

.250

The post Conical Tip CD Insulation Pin (Aluminum) appeared first on Davis Stud Welding.

(For annular ring studs

APPLICATION:

Designed to lock on to annular ring, “Navy”, studs.

MATERIAL:

Aluminum, Optional: Mild Steel and Stainless Steel

 

SIZE:

For 3/16″ diameter studs

The post Annular Ring Caps (Aluminum) appeared first on Davis Stud Welding.

Designed to be used with lacing wire to wrap insulation around irregular shape.

MATERIAL:

Washer – Aluminum or Stainless Steel Ring – Zinc alloy, bright zinc plated.

NO-AB:

Washers are available stamped “NO AB” to indicate non – asbestos material.

The post Lacing Washer & Ring (Aluminum) appeared first on Davis Stud Welding.

(For 1/4-20 threaded studs)

APPLICATION:

Designed to be threaded down through pre-drilled holes in the panel on to pre-welded studs providing firm, water resistant attachment.

MATERIAL:

Aluminum & Neoprene Rubber.

SIZE:

For 1/4-20 threaded studs.

The post Panel Nut (Aluminum) appeared first on Davis Stud Welding.

Designed to be used with lacing wire to wrap insulation around irregular shape.

MATERIAL:

Washer – Aluminum or Stainless Steel Ring – Zinc alloy, bright zinc plated.

NO-AB:

Washers are available stamped “NO AB” to indicate non – asbestos material.

The post Lacing Washer & Ring (Stainless Steel) appeared first on Davis Stud Welding.