NOM. D

MIN. L

RD

RL

1/8

3/4

..122

.312

3/16

3/4

.175

.312

The post Flanged CD Annular Ring – Navy (Mild – Low Carbon Steel) Plated appeared first on Davis Stud Welding.

NOM. D

MIN. L

RD

RL

1/8

3/4

..122

.312

3/16

3/4

.175

.312

The post Flanged CD Annular Ring – Navy (Mild – Low Carbon Steel) Non-Plated appeared first on Davis Stud Welding.

(For 10-24 threaded studs)

APPLICATION:

With 10 – 24 weld studs One piece washer – type locknut combination serving as hex nut, lockwasher and flat washer. design encloses fastener when placed on stud.

MATERIAL:

Mild Steel. Nickel Plated.

 

SIZE:

For 10-24 threaded studs

The post Combination Hex Nut & Lock Washer (Closed) appeared first on Davis Stud Welding.

(For annular ring studs

APPLICATION:

Designed to lock on to annular ring, “Navy”, studs.

MATERIAL:

Aluminum, Optional: Mild Steel and Stainless Steel

SIZE:

For 3/16″ diameter studs

The post Annular Ring Caps (Mild – Low Carbon Steel) appeared first on Davis Stud Welding.

SIZE :

D

#10-24 is standard. Other sizes available by special order

LENGTH :

L

3/4″ to 3″ long, in 1/4″ increments as standard. Other lengths available by special order.

The post Threaded Insulation Anchor Bolt appeared first on Davis Stud Welding.

SIZE : 

2 “x 3″ x 3″ x 1” standard size 

LENGTH : 

20 Gauge, Mild (Low Carbon) Steel 

PLATING : 

Galvanized is standard 

APPLICATION : 

For use in installation of fire barrier and sound 
barrier safing insulation. 
This non-welded fastener is used as a support 
bracket to impale and secure insulating materials
between floor slab and spandrels at floor edge or
anywhere that support for material is required. 

STANDARD PACKAGING : 

500 per carton (43lbs. carton weight – approximately)

The post Safing Z Clip Insulation Anchor appeared first on Davis Stud Welding.

SIZE :

D

3/16 nominal.Actual ring dia meter is .175″.

LENGTH :

L

7/8, 1-7/8.2-7/8,and 3-7/8 are standard. Other lengths available by special order.

The post Annular Ring Insulation Anchor Bolt appeared first on Davis Stud Welding.

(For or 3/16 diameter notched end studs)

APPLICATION:

Designed to lock on to Navy notched end studs.

MATERIAL:

Designed to lock on to Navy notched end studs.

The post Key Hole Slotted Washer appeared first on Davis Stud Welding.

]]> https://davisstudwelding.com/product/key-hole-slotted-washer/feed/ 0 3357 https://davisstudwelding.com/product/combination-hex-nut-lock-washer-open/ https://davisstudwelding.com/product/combination-hex-nut-lock-washer-open/#respond Fri, 01 Nov 2019 02:16:04 +0000 http://35.203.42.123/?product=combination-hex-nut-lock-washer-open

The post Combination Hex Nut & Lock Washer (Open) appeared first on Davis Stud Welding.

]]> COMBINATION HEX – NUT and LACKWASHER A (OPEN)

(For 10-24 threaded studs)

APPLICATION:

With 10 – 24 weld studs One piece washer – type locknut combination serving as hex nut, lockwasher and flat washer. Locking design eliminates back- off due to vibration and thermal stress.

MATERIAL:

Mild Steel. Zinc Plated.

 

SIZE:

For 10-24 threaded studs

The post Combination Hex Nut & Lock Washer (Open) appeared first on Davis Stud Welding.

SIZE :

D

12 GA & 14 GA are standard. Other sizes are available by special order. 

LENGTH :

L

2-1/2″ & 4-1/2″ are standard.Other lengths available by special order.

The post Quilting Pin (Mild – Low Carbon Steel) appeared first on Davis Stud Welding.